SST20 Inclinometer

General Information
Technical Information
Docs
Other Features
Product Video

Vigor Technology MEMS Inclinometer / SST20 Inclinometer

Features

Low cost, high performance, suitable for batch application
50Hz refresh rate, 10Hz response frequency
±0.07°accuracy@-15~50℃
±0.2% cross-axis error
Available to horizontal, vertical, headstand, etc installation methods
IP67protection
9~36VDC power supply
Sensing elements survive to 1500g shock while operating

Applications
Vessel, Engineering machinery, Solar/wind energy, automobile/truck/vehicle, Communication/electric Tower monitoring, High-voltage pylon monitoring, Antenna, construction engineering, Landslide, etc

Output Interface	RS232/RS485/CAN/CANOpen/Switch	0.5~4.5VDC/4~20mA
Measurement range	±5°、±10°、±15°、±30°、±45°、±60°、±90°、 ±180°、0~360°
Accuracy	±0.07°@-15~50℃	±0.15°@-15~50℃
Non-linearity	±0.03°	±0.05°
Resolution	0.002 °	0.005°
Repeatability	±0.02°	±0.05°
Offset	±0.02°	±0.05°
Cross-axis sensitivity	±0.2%FS	±0.2%FS
Measuring axis	1 or 2 axis（±180°and 0~360°measurement range single axis only）
Bandwidth	Default 3Hz，5Hz、10Hz available
Response time	5ms（no filtering）	10ms（no filtering）
Refresh rate	Default 5Hz，max. 50Hz	50Hz
Cold start warming time	Less than 60s
Interface features	RS232: 9600bps (adjustable), 8 data bits, 1 start bit, 1 stop bit	Voltage output: 0.5~4.5VDC; Internal resistance 0.3Ω; Drive current (max.) 15mA
	RS485: 9600bps (adjustable), 8 data bits, 1 start bit, 1 stop bit No matched resistance
	CAN2.0: according to ISO11898-2 standard, 40k~1MBit/s baud rate, adaptive standard frame and extended frame format No matched resistance
	CANOpen: according to DS301 standard, 40k~1MBit/s baud rate No matched resistance	Current output: 4~20mA; Internal resistance 50MΩ; load impedance 150~650Ω
	Switch output: Darlington OC output, load with1A @9～36VDC, alarm point can be pre-set in factory
Power consumption	RS232/RS485 Output: 9~36VDC, current ≤50mA@24VDC	16~36VDC current≤30mA（no-load）@24VDC
	CAN/CANOpen Output: 9~36VDC, current≤80mA@24VDC
	Switch output: 9~36VDC，current≤50mA（no-load）@24VDC
Operation temperature range	-40～85℃
Storage temperature range	-40～85℃
EMC	According to EN 61000/GBT17626
Insolation	≥100MΩ
MTBF	10 years
Shock	100g@11ms, three-axis, half- sine
Vibration	8grms，20～2000Hz
Protection	IP67
Connector	M12 5-Pin socket
Weight	≤200g (no connector or cable)

SST20 Inclinometer

Demisions (mm)

Wiring

Explanations: land supply alarm alarm tilt meter, provides factory input only for alarm point. STAY
The use of alarm point with special request must specify all requests when ordering. The uniaxial tiltometer has only the X axis.

Vigor Technology MEMS Inclinometer

SST20 Inclinometer

Partners