OPTI-EYE®
DIN Rail Mountable Sensor
OPTI-EYE® Photoelectric Sensors are rugged, cost effective, general purpose sensors. They provide a miniature sized, easy to use, versatile waterproof combination of high reliability and a high speed of response for those tough industrial sensing tasks.
Features:
• Choice of nine "quick-change" optical blocks
• Available with red or infrared light sources
• Built-in cable connector or attached cables
• Mounting options: DIN rail, through-hole or bracket mount
• Range adjustment with three LED indicators for easy setup and monitoring
SUPPLY VOLTAGE:
• 12 to 24 VDC
• Polarity Protected
CURRENT REQUIREMENTS:
• 60 milliamps (exclusive of load)
OUTPUT TRANSISTORS:
• (1) NPN and (1) PNP sensor output transistors
• (1) PNP Action Alert output transistor
• Outputs sink or source up to 150 milliamps (current limit)
• Momentary short circuit protected against pulsing at start-up
• Light/Dark switch determines output status
RESPONSE TIME:
• Minimum duration of input event = 500 microseconds
LED LIGHT SOURCE:
• Options: Infrared= 880nm, Red= 660nm,
• Pulse Modulated
AMBIENT TEMPERATURE:
• -40ºC to 70ºC (-40ºF to 158ºF)
RUGGED CONSTRUCTION:
• Chemical resistant high impact polycarbonate housing
• Waterproof, NEMA 4X, 6P, and IP67 enclosure rating
• Conforms to heavy industry grade CE requirements
DIMENSIONS:
• Width: 2.35 in (59.7mm), Height: 1.38 in (35.5mm), Depth: .48 in (12.2mm)
MAXIMUM SENSING RANGE:
• Retroreflective: up to 20 ft.
• Proximity: up to 3 ft.
• Fiberoptic Prozimity: up to 3 in. w/o lens / 6 in. w/lens
• Fiberoptic Opposed Mode: up to 8 in. w/o lens / 20+ft. w/lens
Available OPTI-EYE® Sensor Models:
OPTI-EYE® with 6' Cable:
Infrared LED
OI
OIF4
OIO4
OIO5
OIR4
OIV4
OIV6
OIV8
Red LED
OR
ORF4
ORF5
ORO4
ORO5
ORR4
ORR5
ORV4
ORV6
ORV8
OPTI-EYE® with Connector:
Infrared LED
OIC
OICF4
OICO4
OICO5
OICR4
OICV4
OICV6
OICV8
Red LED
ORC
ORCF4
ORCF5
ORCO4
ORCO5
ORCR4
ORCR5
ORCV4
ORCV5
ORCV6
ORCV8
Special OPTI-EYE®:
OIX101O5
OIX104O5