SMARTEYE® SmartDot® Laser Sensor
Precision Laser Sensor
The SMARTEYE® SmartDot® Laser Sensor from Tri-Tronics Company, is designed for precise, small parts detection at long ranges. The consistently small laser beam is used to detect such things as a tab on a battery, a misaligned or missing bottle cap, or a cross-threaded can lid. The SmartDot Laser Sensor can be easily aligned, repeatedly in order to be used in the inspection and rejection of micro-parts such as the legs on an IC chip, threads on a bolt or screw, and to check for a number of critical identifying features on miniature products, like syringes and other biomedical devices.
The SMARTEYE® SmartDot® Laser Sensor has an OLED display providing the kind of visual confirming information which makes setup a breeze, and instills confidence in understanding just how well the sensor will perform long-term. Displaying all the necessary information to determine proper setup for maximum up-time was the ultimate deciding factor in including the OLED display in this highly capable sensing device. Should any applications require small spot precision, or micro part detection or inspection, the new SmartDot Laser Sensor from Tri-Tronics should be the first choice.
Features:
• Consistent Laser Beam Spot
(throughout beam path)
• Repeatable Alignment
(from sensor to sensor)
• OLED Graphic Display
• 180 degree Rotating Connector
• NPN and PNP Outputs
• M12, 5 pin Connector, or Cable
• 10-30VDC
• IP 68
• 240 microseconds Response Time
• Push Button AUTOSET
• Tweakable/Adjustable
• 10-LED Contrast Indicator
• Threshold and Set-Point Numeric Graphic
• Timers; On Delay, Off Delay, One Shot
• Red Laser, Class 1
• Button Lockout
• Sensor Scope Diagnostics
• Short Range, Long Range, Retroreflective Models
Benefits:
• Easily Align Replacement Sensors
• See Through Tight Spaces at Long Distances
• Easy Setup
• Low Maintenance
• Confident Setup
• Robust and Durable
• High Speed
• Accurate
• Repeatable
• Applications:
• Small Parts Detection
• Bottle Cap Alignment
• Can Lid Cross-threading
• Vision System Trigger
• Metal Thread Detection on Machined Parts
• Small Hole Detection at up to 18 Inches
SUPPLY VOLTAGE:
10 to 30 VDC
Polarity Protected
Note: For use in Class 2 circuits
CURRENT REQUIREMENTS:
35 milliamps max. at 24VD
OUTPUT TRANSISTORS:
(1) NPN and (1) PNP sensor output transistors
Outputs sink or source up to 150 milliamps (current limit)
All outputs are continuously short circuit protected
REMOTE AUTOSET INPUT:
Selectable:
NPN Input, Connect to 0VDC
PNP Input, Connect to 10-30VDC
RESPONSE TIME:
Light state response = 240 microseconds
Dark state response = 240 microseconds
LASER LIGHT EXPECTANTCY:
50,000 hours @ 25ºC
LIGHT SOURCE:
Red Laser: Class 1 or II
EN 60825-1 (2003)
SPOT SIZE:
Short Range: .05" X .03" @ 6" (152mm)
Long Range: .07" X .05" @18" (456mm)
Retroreflective: .1" X .01" @ 5' (1.52m)
PUSHBUTTON CONTROL:
Two push buttons
AMBIENT TEMPERATURE:
-40ºC to 70ºC (-40ºF to 158ºF)
RUGGED CONSTRUCTION:
Chemical resistant high impact thermoplastic housing
Waterproof rating: IP68
Conforms to heavy industry grade CE requirements
RoHS Compliant
DIMENSIONS:
Width: 2.037in (51.73mm)
Height: 2.005in (50.9mm)
Depth: .812in (20.6mm)
Focal Distance:
Short Range Proximity: 6" (152mm)
Long Range Proximity: 18" (456mm)
Retroreflective: 5' (1.52m)
Available SmartDot Sensor Models:
SmartDot Sensor with 6' Cable:
SLV - Short range proximity
SLP - Long range proximity
SLR - Retroreflective
SmartDot Sensor with M12 Connector:
SLVC - Short range proximity
SLPC - Long range proximity
SLRC - Retroreflective
Accessories:
GSEC-6 - 6’ Shielded Cable
GSEC-15 - 15’ Shielded Cable
GSEC-25 - 25’ Shielded Cable
AR51 - Laser Reflector 51mm
PRD1 - Press-On Reflector 1'
SLB-1 - Mounting Bracket