SMARTEYE® X-MARK™
X-tremely High Speed Registration Sensor
The SMARTEYE® X-MARK™ is the fastest, most accurate registration mark sensor available on the market. The X-MARK™ was designed to target the printing, packaging, and converting markets. By creating a specific sensor to exceed the current capability of the market leaders, and at a price that removes all barriers to change, the X-MARK™ is sure to attract the attention of engineers and purchasing agents alike.
Features:
• 10µs Response Time
• 5µs Repeatability
• Four AUTOSET Modes -
• Including "Dynamic" AUTOSET
• PLC and External Programming
• Connector or Cabled Version
• Full Spectrum, White LED
• AUTOSET – One-Touch Setup
• 8-LED Dual-Function Bar Graph
• Universal Mounting
Benefits:
• Increase Edge Accuracy at the highest Speeds
• Virtually Eliminate Setup Time
• Save 100% Registration Waste Cost
• Eliminate Compensation Software Requirement
• Repeatable Leading Edge or Trailing Edge Accuracy Consistently at 5µs
• Increase Throughput Capacity
• Eliminate Machine Speed Constraint
• X-treme Precision
Highly accurate from any direction
SUPPLY VOLTAGE:
• 10 to 30 VDC
• Polarity Protected
• Intended for use in Class 2 circuits
CURRENT REQUIREMENTS:
• 30 milliamps (exclusive of load)
OUTPUT TRANSISTORS:
• (1) NPN and (1) PNP sensor output transistors
• Outputs sink or source up to 150 milliamps (current limit)
• All outputs are continuously short circuit protected
REMOTE AUTOSET INPUT:
• XM/XMC-1 & 2 Models – Momentary sinking input (1mA)
• XM/XMC-3 Models – Momentary sourcing input (1mA)
Note: Remote programming available in XM/XMC-1 Models only.
REMOTE LT/DK INPUT
• XM/XMC-2 Model – Connect to Negative/0VDC
• XM/XMC-3 Model – Connect to Positive/10-30VDC
RESPONSE TIME
• 10µs
REPEATABILITY
• 5µs
LED LIGHT SOURCE:
• White = Broadband Color Spectrum
PUSH BUTTON CONTROL:
• AUTOSET
• INVERT outputs
• Manual Adjustments
• Timer – 10ms Pulse Stretcher
AMBIENT TEMPERATURE:
•10ºC to 60ºC (50ºF to 140ºF)
DIAGNOSTIC INDICATORS
• Contrast Indicator – Display scaled reading of sensor’s response to contrasting light levels (light vs. dark) on an 8 bar LED display
Note: All 8 LEDs will flash three times if contrast insufficient or too low in Two-Point AUTOSET mode.
• Red LED Output Indicator – Illuminates when the sensor’s output transistors are “ON”
Note: If Output LED flashes, a short circuit condition exists.
• Green LED Timer Indicator – Illuminates when the 10ms pulse stretch timer is enabled
• Red LED INVERT Indicator – Illuminates when INVERT is enabled
LIGHT IMMUNITY
• Responds to sensor’s pulsed modulated light source – immune to most ambient light including indirect sunlight
RUGGED CONSTRUCTION:
•Chemical resistant high impact polycarbonate housing
•Waterproof, ratings: NEMA 4x, 6p and IP67 enclosure rating
•Conforms to heavy industry grade CE requirements
HYSTERESIS
• Dynamic – adjusted by AUTOSET
Available X-MARK™ Sensor Models:
X-MARK™ with 6' Cable:
XM-1
XM-1P
XM-2
XM-2P
XM-3
XM-3P
X-MARK™ with Connector:
XMC-1
XMC-1P
XMC-2
XMC-2P
XMC-3
XMC-3P